Need Help! can't find any complete answer. I am sure there is some one that has all the connec


Results 1 to 4 of 4

Thread: can't find any complete answer. I am sure there is some one that has all the connec

  1. #1
    Registered
    Join Date
    May 2013
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Question can't find any complete answer. I am sure there is some one that has all the connec

    I have a 4 axis TB6560-4v3 controller and a HY VFD for my 1.5K spindle.
    I have been working on this issue on and off for a couple of years using the panel to control the spindle. but now I need to control the spindle on and off as well as the speed.from the Mach3 application. Every tutorial I see or video seems to be incomplete.

    The controller has a relay and other outputs but all the explanations don't give a final setup. All my other operations on my cnc work correctly including center and edge finding and Z zeroing. I know that I need to set the parameters in the VFD and to use the FOR and DCM for on and off and the V1 and ACM for speed control but I am not sure what pins to use for speed on the board. and the output settings for speed. The on off is connected to the relay plug. but where do I go from hear. Please help. This is just so frustrating.

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: can't find any complete answer. I am sure there is some one that has all the con

    I don't think that those boards have the analog speed control that you need.
    Do you have a link to what you have?

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    May 2013
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: can't find any complete answer. I am sure there is some one that has all the con

    Quote Originally Posted by ger21 View Post
    I don't think that those boards have the analog speed control that you need.
    Do you have a link to what you have?
    https://www.hobbielektronika.hu/foru....php?id=159746



  4. #4
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: can't find any complete answer. I am sure there is some one that has all the con

    You don't have a 0-10v PWM for speed control on your control Board so you could get a PMW Board from CNC4PC if you have some spare outputs to use,or use Modbus to control for your spindle control, for this you need a plug in which is available here on the Zone

    If you have set speeds then you can set your speed and just use Mach3 to turn it ON/OFF with the relay you have

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

can't find any complete answer.  I am sure there is some one that has all the connec

can't find any complete answer.  I am sure there is some one that has all the connec