Plenty of sources via Google, also most local electrical suppliers carry them or can bring one in for you.
Al.
I have a huanyang vfd for 2.2k spindle. I need an enclosure for it possibly nema? I tried to do a search but now luck
Similar Threads:
Plenty of sources via Google, also most local electrical suppliers carry them or can bring one in for you.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Ya I was just hoping someone had a link to one they know worked well
It's my preference to mount VFDs in open air, on the wall or some other out of the way location. Then just blow it out occasionally. All of my VFDs are mounted in open air, with the exception of one that is in a fan cooled cabinet. Any enclosure that provides a few inches clearance all around the VFD would work, better if you install a fan and a filter for cooling.
When mounting on a wall, mount the VFD on a metal plate spaced about an inch off of the wall with some standoffs.
Jim Dawson
Sandy, Oregon, USA