3kw motor and vfd

**Atomas0907** · 08-01-2018, 07:53 AM

Thanks Mactec 54 i did see that when i posted this on the site i fix the photo and what wire i used

**mactec54** · 08-01-2018, 08:24 AM

Originally Posted by Atomas0907

Thanks Mactec 54 i did see that when i posted this on the site i fix the photo and what wire i used

Well done,

what cable are you using for the spindle to VFD, or is what you have just a temporary connection just to try the spindle

**Atomas0907** · 08-01-2018, 08:43 AM

The spindel to vfd wiers are for testing this is only to get the good motor pins to the good place to the vfd , my shieled 4 wire 14awg is ordered and it's going to come in , in a day or two

**mactec54** · 08-01-2018, 09:14 AM

Originally Posted by Atomas0907

The spindel to vfd wiers are for testing this is only to get the good motor pins to the good place to the vfd , my shieled 4 wire 14awg is ordered and it's going to come in , in a day or two

That's what I though you where doing, make sure you connect the Shielded cable correct, some snips to give you an idea of what and how the shield should be connected