Spindle speed
I've dsp 501 vfd inverter and chinese 5.5kw spindle for my router. Now how i can check at which speed my router is spinning?
Sent from my SM-J710FN using Tapatalk
Similar Threads:
- Just IN- New Low Speed Spindle - Top speed 12000 RPM - Shown milling aluminum
- Fanuc AC Spindle Drive speed does not match S-code speed
- Help chosing a spindle speed sensor to indicate spindle speed in mach3
- Problem- mach3 spindle dro not working, spindle speed changing while jogging and running code
- BPSeriesI / Centroid control- Spindle speed all out of whack with speed dial?
Re: Spindle speed
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Surfacing aluminum with 2.2kw spindle. Best tool for the job?
Most use a non-contact tachometer. You stick a little piece of reflective tape to the spindle shaft and the tach bounces a light beam off it and counts the pulses.Originally Posted by Muhammad_Haroon
Reply with Quote
