- Problem- 6040 cnc PRT-E1500W vfd problem
-
Registered
6040 cnc PRT-E1500W vfd problem
A couple months back i bought a 6040 cnc router off of ebay and ive been able to find the information for everything but the vfd, Ive looked all over the internet and I cant find any info on it. Thanks
Similar Threads:
-
-
Registered
Re: 6040 cnc PRT-E1500W vfd problem
If you post a picture of the VFD's actual electronics board, I'll be able to see if the manual I have applies to your board.
-
Registered
Re: 6040 cnc PRT-E1500W vfd problem
Hi I'm in the same boat, that the same machine I just received but can't get the spindle to run. Did you have any luck finding a manual for the PRT-E1500W?
- Problem- 6040 cnc PRT-E1500W vfd problem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules