- Cosmec Fox 48 Troubleshooting
-
Registered
Cosmec Fox 48 Troubleshooting
We obtained a used 2006 Cosmec Fox 48. We have operated a Multicam cnc router since 1999, but getting the Fox 48 to operate has proven quite a challenge. Is there anyone here that could help us along? We are willing to pay for phone or Skype/Facetime support.
At this time the machine is operable, but the controller is not recognizing the .rou files on the USB. It only recognizes .dat files.
Similar Threads:
-
-
Member
Hi there we too purchased a cosmec fox 48 and are having the same issues with it. We are trying to work through it but wanted to see if you had ever figured anything out. We annoy get the machine to recognize that there is a file trying to be loaded. If you have any information please let me know. I am new to the cnczone.
-
Member
Re: Cosmec Fox 48 Troubleshooting
Hello Woodsedge33. How are you going with the Fox 48? Third in line to have purchased this machine. Would like to know if you have any documentation/information that you can share. Also, what software are you using. Thank in advance.
- Cosmec Fox 48 Troubleshooting
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules