Cosmec Fox 48 Troubleshooting

Results 1 to 3 of 3

Thread: Cosmec Fox 48 Troubleshooting

  1. #1
    Registered
    Join Date
    Dec 2016
    Location
    United States
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Cosmec Fox 48 Troubleshooting

    We obtained a used 2006 Cosmec Fox 48. We have operated a Multicam cnc router since 1999, but getting the Fox 48 to operate has proven quite a challenge. Is there anyone here that could help us along? We are willing to pay for phone or Skype/Facetime support.

    At this time the machine is operable, but the controller is not recognizing the .rou files on the USB. It only recognizes .dat files.

    Similar Threads:


  2. #2
    Member Woodsedge33's Avatar
    Join Date
    Dec 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hi there we too purchased a cosmec fox 48 and are having the same issues with it. We are trying to work through it but wanted to see if you had ever figured anything out. We annoy get the machine to recognize that there is a file trying to be loaded. If you have any information please let me know. I am new to the cnczone.



  3. #3
    Member Bromley555's Avatar
    Join Date
    Mar 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Cosmec Fox 48 Troubleshooting

    Hello Woodsedge33. How are you going with the Fox 48? Third in line to have purchased this machine. Would like to know if you have any documentation/information that you can share. Also, what software are you using. Thank in advance.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cosmec Fox 48 Troubleshooting

Cosmec Fox 48 Troubleshooting