Hi i'm having some nose like chatter, and clicking with jogging . I have a dial indicator setup and i see the motor move back when it clicks...I have the 3 nema kl-h2100 570oz in motors with the kl-5056 drivers that are set to 1/16 @ 5A...they are configerd two Y-axis and one X-axis . the Y motors 2 motor 4 is slaved to motor 2......Also when i am running a 3D job for for a couple of hours they get very hot, not so hot that you can't touch them but very hot maybe not hold them.

Similar Threads: