New to CNC turning and solidworks need advice

**Ronzi83** · 08-14-2021, 09:56 AM

Hello there all.

I am new member and i am trying to learn how to use CNC lathe. I would like to learn how to draw, but first i will need some basics. I would like to ask you for any recommendation of video how to draw 3d model in solidworks? How to draw round item and not only from top ets... Mayby some eazy round project.

Thank you a lot for any help

Ronzi83

Similar Threads:

Newbie- Need advice in buying new computer for Solidworks
Need Help!- A bit of turning advice
Turning existing dwg file into 3D (solidworks)
Need Advice Turning wood w/ Sherline cnc lathe

**deadlykitten** · 08-14-2021, 10:34 AM

hy

if you share real drawings, i will give you videos, how to make those; should get you up to speed in no time

**Ronzi83** · 08-15-2021, 01:45 AM

Hey, i send you message, but dono if you get it. I made screenshoot of my drawing. It is 1st time i used to draw in Solidworks.

Thank you

**deadlykitten** · 08-15-2021, 02:02 AM

order 1 2 3 4

anything else ?

**Ronzi83** · 08-15-2021, 04:22 AM

Like this?

Thank you a lot for help. So after this i need to send file to usb or do i need to convert it?

Greg

**Ronzi83** · 08-15-2021, 08:59 AM

Hey, so i have draw this, but i can not make hole on top of bullet to drill 1.5mm hole and it will keep me this notification on pisture to creat plane ets.

Regards

Greg