Need Help! Spin too large; check machine ID file


Results 1 to 1 of 1

Thread: Spin too large; check machine ID file

  1. #1
    Member
    Join Date
    Aug 2016
    Location
    United Kingdom
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Spin too large; check machine ID file

    I've been running my 3D router with a fixed speed spindle motor and set the speed in the tool section at 3000rpm. Everything worked well.
    I'm now using a 3phase motor controlled by a VFD and this works OK using the tool stting window up to 10000rpm. My spindle can run up to 18000 revs but when i input this I get the title message, "Spin too large; check machine ID file".
    I can't find the file to change!
    I'm using LinuxCNC as a controller and with the exception of this speed issue it works great with SolidCAM.
    I can change the gcode manually to give me 18000 rpm but that defeats the object.
    Help please.

    Similar Threads:


  2. #2
    caduser007's Avatar
    Join Date
    Oct 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Each Solidcam post processor has 2 files. A *.GPP File containing the code outputs and a corresponding *.VMID file that contains information about the machine and spindle speed. You will need to edit this to no lounger get that message. I hope this helps.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Spin too large; check machine ID file

Spin too large; check machine ID file