Can this be modeled is Solidworks?


Results 1 to 12 of 12

Thread: Can this be modeled is Solidworks?

  1. #1
    Member htraps's Avatar
    Join Date
    Apr 2019
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Can this be modeled is Solidworks?

    It's a knife handle, I made the faces in fusion 360 but that program is very weak and illogical when it comes to sculpting. Can solidworks build off these faces and sculpt the top if exported in .step files?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Can this be modeled is Solidworks?-contourmap-jpg   Can this be modeled is Solidworks?-axis-jpg  


  2. #2
    Activation process peteeng's Avatar
    Join Date
    Jul 2018
    Posts
    533
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    Hi Traps - Yes it can but may as well start again will be cleaner geometry. Does 360 have lofting? That would be the correct way to do this. Peter



  3. #3
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    33852
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    If you can do it in Solidworks, you can do it in Fusion, as they are very similar.
    It's more a matter of knowing how to do it, than if the software can do it.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Member
    Join Date
    Sep 2008
    Location
    USA
    Posts
    124
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    <<<<< It's a knife handle, I made the faces in fusion 360 but that program is very weak and illogical when it comes to sculpting>>>>>>

    I would start over, after viewing some videos to learn how to use Fusion 360.
    https://www.bing.com/videos/search?q...B&&FORM=VRDGAR
    The knife handle should be easy to model.
    Larry



  5. #5
    Member htraps's Avatar
    Join Date
    Apr 2019
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    I've gone through 3 people on fiverr, none could do it and all had 4.9+ ratings for modelling, one more said "can't be done" and now I've got two more currently trying. No, sculpting is not easy in Fusion. I've looked up sculpting tutorials but they never start from a predefined face, they always start from a blob and shoehorn it into the model and the edges never meet cleanly the way I need it to. I need a face to cleanly transition into a sculpted body, yes it probably can be done but not by any sensible and logical means.



  6. #6
    Member
    Join Date
    Sep 2008
    Location
    USA
    Posts
    124
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    I noticed you made a prototype using some formable material.
    I was a member of TechShop Detroit before they closed.
    They had a scanner, which would be useful, and then import to your Cad program.
    Might be the method to try.
    Larry



  7. #7
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    33852
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    Nothing in 3D modeling is easy if you've never done it before. Something like sculpting takes a lot of practice to get the hang of it.

    Not sure I'd take much advice from someone who works for $5.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  8. #8
    Member htraps's Avatar
    Join Date
    Apr 2019
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    Quote Originally Posted by ger21 View Post
    Nothing in 3D modeling is easy if you've never done it before. Something like sculpting takes a lot of practice to get the hang of it.

    Not sure I'd take much advice from someone who works for $5.
    $5 is the minimum, I'm about to be refunded for over $100 because he couldn't do it, I also payed out over $40 because they worked really hard and wanted to keep trying but it wasn't going anywhere (I didn't have to pay but I thought it was the right thing to do). One currently underway has cost me $54. Maybe there's an excuse for it being so hard, but I just think sculpting is poorly integrated in Fusion that's why I opened the discussion in Solidworks to see if its worth me trying to sign up for their free program. I've used Maya years ago and from memory it was a lot more intuitive but that's not for this.



  9. #9
    Member
    Join Date
    Dec 2015
    Posts
    375
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    I charge $115 an hour. So $40, even $100, isn't much. That is especially true if you want me to attempt to recreate a dimensionless image with some rough outlines on it.

    Yes, that can be sculpted in either Fusion or SW's.



  10. #10
    Member
    Join Date
    Nov 2012
    Location
    Canada
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    Try contacting Lars Christensen



  11. #11
    Member htraps's Avatar
    Join Date
    Apr 2019
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    Quote Originally Posted by CL_MotoTech View Post
    I charge $115 an hour. So $40, even $100, isn't much. That is especially true if you want me to attempt to recreate a dimensionless image with some rough outlines on it.

    Yes, that can be sculpted in either Fusion or SW's.
    You likely don't live in Bangladesh. I earn $16hr, its a lot of money to me. It's not dimensionless, I of course provide the face giving all XY and hole positions as well as a top photo with measured Z. If you are saying that given that information and start and working at top tier rates you cannot complete it in an hour, I'm saying that sculpting in Fusion is rubbish.



  12. #12
    Member
    Join Date
    Dec 2015
    Posts
    375
    Downloads
    0
    Uploads
    0

    Default Re: Can this be modeled is Solidworks?

    I didn't say I couldn't complete it in an hour. My point is that for good help you have to pay good money. Again, it can be sculpted in either, the problem is that you've hired people who don't have a clue what they are doing.

    You might also consider some of the other suggestions, for example it could very easily be modeled using a point cloud.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Can this be modeled is Solidworks?

Can this be modeled is Solidworks?