Need Help! Solidworks in to mastercam file


Results 1 to 1 of 1

Thread: Solidworks in to mastercam file

  1. #1
    Member
    Join Date
    Jan 2009
    Location
    canada
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Solidworks in to mastercam file

    Hello everyone

    We do a lot of concept with SolidWorks.

    When the time has come to machine our concept:


    We transfer our file to mastercam

    And we do a '' dissassembly '' (powerful tool that allows us

    to lay all the solids of our project and thus prepare its programming.

    Solidworks   in to mastercam file-mastercam_f3okodghk3-png

    Mastercam helps us a lot because we have the possibility that programming changes in real time

    if ever a piece would come to be modified in solidworks.

    The only problem is that SolidWorks information

    (BOM: The part number and its material) does not follow when transferred.


    So for the moment, we are back to our old method witch take us a lot of time

    means , each time in the layout,

    make top views of each piece machined and

    add the number of the piece.

    Solidworks   in to mastercam file-acadlt_vhb5yje9by-jpg

    Have anyone been trought this and find the '' eureka solution ''
    any advice are really welcome

    Thanks

    Patrick

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2018
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Solidworks in to mastercam file

    attachments are invalid



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Solidworks   in to mastercam file

Solidworks   in to mastercam file