J-Type Slot


Results 1 to 2 of 2

Thread: J-Type Slot

  1. #1
    Registered
    Join Date
    Nov 2015
    Posts
    0
    Downloads
    0
    Uploads
    0

    Angry J-Type Slot

    Hello guys I am new here and, decent at mastercam and solid edge, Im stumped right now though I have a j-slot drawing that is to a certain depth on an od. I was given a Rollout and my width of my slots. Now my question is are my slots walls meant to be parallel? how would i know if they want radial, On mastercam I can draw then roll the profile and cut it and bam parts done, but my walls are going to be radial.

    ps. posting this on mastercam forum aswell

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2016
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: J-Type Slot

    Are you doing this in sheet metal?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

J-Type Slot

J-Type Slot