Solide Edge ST4 scaling down.


Results 1 to 3 of 3

Thread: Solide Edge ST4 scaling down.

  1. #1
    Registered
    Join Date
    Mar 2012
    Location
    Belgium
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Solide Edge ST4 scaling down.

    hello,

    I used solid edge ST4 to draw a part. But I just realized I used a wrong scale .. so evrything is 10 times bigger than it has to be. :s It took me alot of work to draw it, so I hope anyone can tell me how to scale it down.

    Cheers.

    Similar Threads:


  2. #2
    Ghost BurrMan's Avatar
    Join Date
    Dec 2008
    Location
    United States
    Posts
    4548
    Downloads
    0
    Uploads
    0

    Default

    I found this documentation, but I dont have the ST4 program to search for if it is correct for you.. See if this leads you to the answer.

    Create a new part and then use the part copy facilty to select the original part that you want scaling. In the 'select part copy' window there is an option to change the scale.




  3. #3
    Registered
    Join Date
    Mar 2012
    Location
    Belgium
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    BurrMan thank you so mutch, it worked.

    You made my day.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Solide Edge ST4 scaling down.

Solide Edge ST4 scaling down.