DMG Mori NLX2500SY Post Processor

[hotiron]

I'm in a pinch and need a post processor for a DMG Mori NLX2500SY with sub spindle. SolidCAM is currently 4-6 weeks out and I need to start ASAP on a part order. I'm not sure why they don't have a basic off-the-shelf post for this machine they can provide.

blake@caglemachine.com

anyone that can help would be greatly appreciated

Similar Threads:

• Post-processor EspritCam for DMG Sprint50 Gildemeister
• Newbie- Need post processor for DMG Mori 1100V Ecomill, using Featurecam
• Looking for a Mori Seiki/DMG 635v w/Siemens 810d post
• Post processor for DMG 50 eVo

[fencergrove]

I'm in a pinch and need a post processor for a DMG Mori NLX2500SY with sub spindle. SolidCAM is currently 4-6 weeks out and I need to start ASAP on a part order. I'm not sure why they don't have a basic off-the-shelf post for this machine they can provide.

blake@caglemachine.com/geometry dash

anyone that can help would be greatly appreciated

I can help for Brother cnc 5 axis BNFT series and tapping center.,
hasanotomasyon@hotmail.com
whatsapp number:+905357221418