REWIND RETRACT A axe in gMill_Haas_4x_eval POST.

[sinan-ba]

I am using Solidcam gMill Haas_4x_eval post. My VMC has A axe rotary table but limited in rotation ( from 0 to +359.999).

What is the parameters that must be set to get a code within this range of rotation. In case out of this range , I need the Z to retract in safe & the rotary table rewind.
example :

X2.26 Z20. A3.6
X2.255 Z19.9901 A1.8
X2.25 Z20. A0.

X2.245 Z19.9901 A358.2
X2.24 Z20. A356.4


OUTPUT to be like this:


X2.255 Z19.9901 A1.8

X2.25 Z20. A0.

G0 Z100
X2.245 A358.2
G1 Z19.9901
X2.24 Z20. A356.4
X2.235 Z19.9901 A354.6


thank you

Similar Threads:

• Problem- FORTH AXIS REWIND
• Need Help!- High speed toolpath gaps- How do I make "Never retract" never retract?
• Spindle motor rewind
• Need Help!- REWIND AND REPEAT PROGRAM