Change D-offset Number


Results 1 to 1 of 1

Thread: Change D-offset Number

  1. #1
    CYKong's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Change D-offset Number

    Hi & Good Day,


    Normally, we set the tool number in SOLIDCAM, the D-offset number will follow the tool number.
    But I have a case that, I want set different D-offset number for same tool.

    For example: Geometry A use T1 D1; Geometry B uses T1 D31

    In MasterCAM can do this. Whether have any method can do in SOLIDCAM. Because I tried to change the D number in tool setting, but it can't work.



  2. #2
    Member partur's Avatar
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Re: Change D-offset Number

    You need add this feature to postprocessor..



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Change D-offset Number

Change D-offset Number