I think your machine (machine id and post file) do not support it.
This is picture from Mazak Integrex i-200 machine.
Here is a screenshot: https://imgur.com/a/1vykyUb
In other tutorial videos, i saw they have the ability to change tool orientation. But i don't have that.
Could it be because it converted to mill-turn part? I don't have the option of not having it do that when i create a new turning cam project: a popup dialog appears asking me if i want to save before converting to mill-turn project type.
Similar Threads:
Last edited by cryptopsy; 07-17-2018 at 05:41 AM.
I think your machine (machine id and post file) do not support it.
This is picture from Mazak Integrex i-200 machine.