Reply with QuoteI think your machine (machine id and post file) do not support it.
This is picture from Mazak Integrex i-200 machine.
why can't i rotate tool angle in turning face operation?
Here is a screenshot: https://imgur.com/a/1vykyUb
In other tutorial videos, i saw they have the ability to change tool orientation. But i don't have that.
Could it be because it converted to mill-turn part? I don't have the option of not having it do that when i create a new turning cam project: a popup dialog appears asking me if i want to save before converting to mill-turn project type.
Similar Threads:
Last edited by cryptopsy; 07-17-2018 at 05:41 AM.
Re: why can't i rotate tool angle in turning face operation?
I think your machine (machine id and post file) do not support it.
This is picture from Mazak Integrex i-200 machine.
Re: why can't i rotate tool angle in turning face operation?
I figured out how to do it. It was in the machine simulation window (i dont remember what the tab was called, because i'm in linux right now ...).Originally Posted by Danpil
I think your machine (machine id and post file) do not support it.
This is picture from Mazak Integrex i-200 machine.
Posting Permissions
