Need Help! Help with solidcam tool library


Results 1 to 2 of 2

Thread: Help with solidcam tool library

  1. #1
    Registered
    Join Date
    Jan 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation Help with solidcam tool library

    New to solidcam and was put in charge of making a tool library. My question is, is there any way to just load tooling from the manufacture? Say if I bought a seco feed mill, do manufactures offer tooling to be added to solidcam if that makes sense? just seems itd be way faster and easier than doing it manually. Any help appreciated!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2017
    Location
    Canada
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Help with solidcam tool library

    Hello Dmcl1203

    If your supplier has their tools listed in an excel file format like .csv or .xls then you can do a massive info import to create a tool library. There are other ways to import many tools at once but I would need to see what format you have them in. I would suggest contacting us at the main tech support line (if you are in North America) or contacting your local reseller for help on this.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with solidcam tool library

Help with solidcam tool library