New to solidcam and was put in charge of making a tool library. My question is, is there any way to just load tooling from the manufacture? Say if I bought a seco feed mill, do manufactures offer tooling to be added to solidcam if that makes sense? just seems itd be way faster and easier than doing it manually. Any help appreciated!
If your supplier has their tools listed in an excel file format like .csv or .xls then you can do a massive info import to create a tool library. There are other ways to import many tools at once but I would need to see what format you have them in. I would suggest contacting us at the main tech support line (if you are in North America) or contacting your local reseller for help on this.