Hello
I could develop a post for you. If interested mail me at maniac.cnc@gmail.com
Btw, it is only 3 axis mill or smth else?
Regards
Hi, I need postprocessor fanuc 10m for solidcam!!
Hello
I could develop a post for you. If interested mail me at maniac.cnc@gmail.com
Btw, it is only 3 axis mill or smth else?
Regards
Hi!
write me in danpil555@gmail.com
Hi!
This is my NEW postprocessor for 4-axis HAAS VF-2 with additional table (A-axis).
Please see in YouTube directly:
Thank you for watching and health to you!
Contact me: danpil555@gmail.com
Hi!
This is my NEW postprocessor for 3-axis turn-mill machine ML-480 Fanuc 0i Mate TC.
Please see in YouTube directly:
Thank you for watching and health to you!
Contact: danpil555@gmail.com
Hello!
This is my NEW postprocessor for 5-axis mill machine MAXMILL QMC-1050 Fanuc 0i-MF.
Please see in YouTube directly:
Thank you for watching and health to you!
Contact: danpil555@gmail.com
Hi guys,
At this link I found a large selection of postprocessors solidcam (user: guest
password: guest) - 401 Authorization Required
I found it via youtube channel:
Postprocessor development is a long painstaking work.
All CNC programmers have their own preferences.
Therefore, there is still an individual moment with each order.
Could you share Sinumerik 828D for SolidCam ?
Pawe?
I need solidcam post for Mazak Integrex 200 IV ST U1500
Help me please
Looking for pp for HAAS EC400. Email sent.
Hello!
This is my NEW Postprocessor for 4-axis (XYZC) turn-mill machine TTL-20BLMY Fanuc 0i-MF.
https://www.tmt.com.tw/ttl-series/TTL-20B-20BL.html
Please see in YouTube directly:
Thank you for watching and health to you!
Contact: danpil555@gmail.com
Hello!
This is my new Postprocessor and Machine simulation for 4-axis (XYZA) Milling machine QMC-500 Fanuc 0i-MF.
Please see in YouTube directly:
Thank you for watching and health to you!
Contact: danpil555@gmail.com
Hello!
I done postprocessor for newest Haas CM-1 machine with additional rotary table.
All developing I done online
The postprocessor have 2 configurations:
1) 3-Axis
This configuration of postprocessor using for 3-Axis working without rotary table.
2) 5-Axis
This configuration using for 5-Axis milling with rotary table.
Contacts:
danpil555@gmail.com
Hi!
This is my newest postprocessor DMG CTX-650 for SolidCAM 2021 version.
Sinumerik 840D Sl.
danpil555@gmail.com
Hi for all!
I developed new 2-configuration postprocessor and machine simulation for SVL-1370.
It is 3-axis machine with additional rotary 2-axis table.
Attachment 482957
If you need quality postprocessor - contact me.