Do you want to create programs for shopturn or shopmill?
I have done the same at my previous workplace. We created the programs on SinuTrain for 2 CNC turning machine and then transferred them per USB stick onto the machine.
However there are a few problems to solve first. Sinutrain must be configurated with the machine data. I was lucky because the machine manufacturer had configuration files available for exact these two machines. So in my case it was quite easy.
But according to Siemens, SinuTrain is not meant to be used as a programming station. But rather to practice the use of the controller.
So think hard before you decide if that’s the best solution for you!
If you have any more questions just let me know..
Regards
Vitra26