SinuTrain Trail: problem with the activation

Results 1 to 2 of 2

Thread: SinuTrain Trail: problem with the activation

  1. #1
    Luk4
    Guest

    Default

    Hello everybody

    I have downloaded the trail version of SinuTrain. After the installation in the Automation License Manager I pulled the test license onto the F: drive in which the SinTrain folder is situated.

    When trying to start up the software the following error message comes up:

    ‘No valid license key found. Please install a valid license key’.

    Can anybody help me?



  2. #2
    InTex's Avatar
    Join Date
    Feb 2007
    Location
    Schladen / Harz
    Posts
    4205
    Downloads
    0
    Uploads
    0

    Default

    Hello

    What you mean pulled? Copied?

    1.This message only comes up when installing it with a License key
    This is not necessary when you only want to install a trial version.

    2. If you would need a license then you need to ‘assign’ it with the license manager to the particular directory.

    3. When the trial version is installed, then the license manager is installed at the same time and the license is automatically copied into the correct folder
    So something is definitely wrong here or you already had a version of SinuTrain on the computer.

    Then it doesn’t make a difference if you choose a different partition.


    You can also contact Siemens directly…

    https://support.automation.siemens.com/WW/l...bjaction=csopen

    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SinuTrain Trail: problem with the activation

SinuTrain Trail: problem with the activation