- Siemens 802c access denied
-
Member
Siemens 802c access denied
Hi there. I bought a Precision Matthews 1330 with a siemens 802c controller on it. I have read the manuals and been working on it with some success for the last few days. I can power up, upload programs, and navigate the user interface just fine. I have one big problem that I was hoping that someone here could help me with... ive found other posts with the problem, but never the solution.
I am unable to input anything to the tool table, or any offset compensation screens, in fact almost everything in the parameters area... any attempt to input anything returns "access denied"
I am going to have a hard time putting this machine into production if I cant fix this problem. Any advice is greatly appreciated.
Scott
Similar Threads:
-
-
Member
Re: Siemens 802c access denied
Did you find a solution to this problem or not? Because I have the same problems
- Siemens 802c access denied
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules