Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.


Results 1 to 4 of 4

Thread: Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.

  1. #1
    Member solowalker41's Avatar
    Join Date
    Nov 2014
    Location
    Rawalpindi
    Posts
    12
    Downloads
    2
    Uploads
    0

    Default Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.

    Hi All

    I have a problem with a DMG 1032v ecoline machining center with a Siemens 840D controller. It froze during a load tool cycle and now I can't load or unload tools in or out of the magazine. In the magazine location on the offset table there is the LL symbol on that particular tool. This symbol normally shows up momentarily during the load tool cycle then disappears & I am pretty sure this has something to do with the problem. The strange thing is I can still use all the tools in the magazine as normal and can load tool in the spindle manually from the virtual magazine, I just can't load or unload from the magazine it self. I was wondering if there is a hidden parameter somewhere that needs to be reset and if anyone knows it. Any help appreciated.

    Note:The snapshot i have attached is not real snap ,it is only for illustration

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.-20200828_230742-jpg  


  2. #2
    Member
    Join Date
    Nov 2006
    Location
    USA Texas
    Posts
    411
    Downloads
    0
    Uploads
    0

    Default Re: Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.

    So on a DMU50 that toolchanger controls are under the custom menu. There's an icon with a conveyor and tool change arm if my memory serves right. You can return each component to the default position then reset the toolchanger system from there. Look in there and see if you can find it.

    If you can't find it I can take a quick video for you next week.



  3. #3
    Member solowalker41's Avatar
    Join Date
    Nov 2014
    Location
    Rawalpindi
    Posts
    12
    Downloads
    2
    Uploads
    0

    Default

    Quote Originally Posted by John_B View Post
    So on a DMU50 that toolchanger controls are under the custom menu. There's an icon with a conveyor and tool change arm if my memory serves right. You can return each component to the default position then reset the toolchanger system from there. Look in there and see if you can find it.

    If you can't find it I can take a quick video for you next week.
    Hi John

    Few days ago while loading the tool ,when machine prompted "Load tool and press NC start" i mistakenly pressed reset key instead of loding tool.
    The tool in the tool list in megazine is in unloaded totools showing that it is in Belademegazine. Symbol LL is appeared with the tool at the place where tool number is shown in loaded tools.

    Now load/unload and delete softkeys are disappeared for that particular tool.

    The problem is that,machine has no Alarm and it is changing different tools(Already loaded) normally.
    No new tool is bieng loaded to the megazine due to that Belademegazine tool.

    I had posted my problem on different forums.
    I share you the links of different forums for making yoy better understand my problem.

    https://www.cnczone.com/vb/cnc-machining/need-help-tool-loading-unloading-jammed-siniumerik-840d-controller-381373/#post3612358


    https://community.sw.siemens.com/s/question/0D54O00006a8Kl7SAE/tool-loading-unloading-jammed-in-siniumerik-840d-controller

    Strongly apalogized for my poor english and typing mistakes.



  4. #4
    Member solowalker41's Avatar
    Join Date
    Nov 2014
    Location
    Rawalpindi
    Posts
    12
    Downloads
    2
    Uploads
    0

    Default

    Quote Originally Posted by John_B View Post
    So on a DMU50 that toolchanger controls are under the custom menu. There's an icon with a conveyor and tool change arm if my memory serves right. You can return each component to the default position then reset the toolchanger system from there. Look in there and see if you can find it.

    If you can't find it I can take a quick video for you next week.
    I found Relocate tool(Softkey) by pressing the Custom key but don't know how to proceed furthure. Please take and send quick video to me if possible.Thanks in advance



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.

Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.

Need Help!Tool loading /unloading jammed in Siniumerik 840d controller.