- Need Help!- Chiron FZ 12 W 2000 Emergency Stop Error
-
Member
Last edited by kerfur; 07-05-2019 at 08:10 AM.
Reason: picture
-
-
Member
Re: Chiron FZ 12 W 2000 Emergency Stop Error
HI.Where are u from ?please contac me whatsapp number +905357221418
-
I have a Sinumrik 810t
The batteries are damage and Its losted all information. I have the files TGE1, TEGE2 , PLC.PCP, and GILDE.SEA
First, I load TGE1 an TEG2 in mode SETUP and later I push SET UP END PW,
Second.- I load PLC.PCP in mode SETUP and later I push SET UP END PW . When I Turn on the Sinumerik I have the Alarm 2000 Emergency Stop, and I can not move the servos in axes x , y, z.
Third.- I load GILDE.SEA in mode NORMAL, but I can not move the servos in axes x, y, z.
I think The PLC blocks the movement of axes, but I Don’t know What else I moust to do , Please Help me.
-
Member
Re: Chiron FZ 12 W 2000 Emergency Stop Error
- Need Help!- Chiron FZ 12 W 2000 Emergency Stop Error
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules