Work offsets shift on sinumerik 828D


Results 1 to 3 of 3

Thread: Work offsets shift on sinumerik 828D

  1. #1
    Member IsakAndersson's Avatar
    Join Date
    Oct 2018
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Work offsets shift on sinumerik 828D

    Hi. I'm trying to shift the work offset in a program. I have tried using g10 g50 g52 g92 but none of them are supported by the controller. What else can I try? I guess I could change the machine variables directly, but this seems risky. Or I can add an x, y and z variable to all the coordinates in the program, but that is very tedious and I rather not. Any ideas? Thanks.

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    186
    Downloads
    0
    Uploads
    0

    Default Re: Work offsets shift on sinumerik 828D

    Coordinate transformations (frames)

    From Siemens manual......
    Settable frames are the configurable zero offsets which can be called from within any NC
    program with the G54 to G57 and G505 to G599 commands. The offset values are predefined by
    the user and stored in the zero offset memory on the controller . They are used to define the
    settable zero system (SZS).
    See:
    ? Settable zero system (SZS) (Page 30)
    ? Settable zero offset (G54 to G57, G505 to G599, G53, G500, SUPA, G153) (Page 149)
    https://www.google.com/url?sa=t&rct=...o2JeKLLX1qoPxw



  3. #3
    Member IsakAndersson's Avatar
    Join Date
    Oct 2018
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Work offsets shift on sinumerik 828D

    That's it. Thanks a lot. Simply trans z-18 does it.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Work offsets shift on sinumerik 828D

Work offsets shift on sinumerik 828D

Work offsets shift on sinumerik 828D