- where really run the control Loops in the CNC System ?
-
Registered
where really run the control Loops in the CNC System ?
Dear all,...
in Sinumerik 840D sl with Simodrive 611 Where really is performed the Position, speed and current control loops ?
The current loop is always executed on the servo-drive ?.
The drawing in the 840D SL and 840Di Manuals indicate differences.
What do we parameterize or adjust on the servos-Drive (simodrive 611 or Sinamics S120), if the control loops are executed in the NC?
Thanks very much in advanced ....
Similar Threads:
-
- where really run the control Loops in the CNC System ?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules