808d 1325 Milling CNC - Looking for PLC

Results 1 to 3 of 3

Thread: 808d 1325 Milling CNC - Looking for PLC

  1. #1
    Registered
    Join Date
    Jun 2016
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default 808d 1325 Milling CNC - Looking for PLC

    So I have an 808d with a 3 axis milling macine with an ATC but the machine is not yet commissioned and I need the PLC written. I have been told however if I can find someone with roughly the same config, it will be easy to copy their PLC. Any help is greatly appreciated.

    Similar Threads:


  2. #2

    Default Re: 808d 1325 Milling CNC - Looking for PLC

    You might try posting on the Machinist page on Facebook: https://www.facebook.com/groups/Machinist/

    While the group can be a bit.... rough... there's also a lot of REALLY good guys on there... altho with 98k+ members, there's a fair share of asshats, but you can just ignore them. There hasn't been ANY problem yet I've had where at least one person was able to help me with a solution.



  3. #3
    Member
    Join Date
    Sep 2009
    Location
    romania
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: 808d 1325 Milling CNC - Looking for PLC

    I will not work! you have to find la PLC programmer to help you with that



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

808d 1325 Milling CNC  - Looking for PLC

808d 1325 Milling CNC  - Looking for PLC