Hello,
If you mean the circular interpolation then there is no difference!
Give us a bit more information so we can help you.
Hello,
interpolation turning on a 840 D is no problem- but what about doing it on a 830 C?
Does anybody know about it?
Thanks
Jim5062
Hello,
If you mean the circular interpolation then there is no difference!
Give us a bit more information so we can help you.
Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
Hello,
Well I believe its works: switch spindle to axle operation and go ….
With the 840 D the turn is an easy thing, on the C it’s a lot more effort to program it.
It’s best to program it over a repetition loop, then you can change settings easier.
Unfortunately we don’t have a 840 C anymore, otherwise I could have helped you.
Greetings Werner