interpolation turn on a 840C

Results 1 to 3 of 3

Thread: interpolation turn on a 840C

  1. #1
    Registered jim5062's Avatar
    Join Date
    Mar 2006
    Location
    Zafra / Spanien
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default

    Hello,
    interpolation turning on a 840 D is no problem- but what about doing it on a 830 C?

    Does anybody know about it?
    Thanks
    Jim5062



  2. #2
    InTex's Avatar
    Join Date
    Feb 2007
    Location
    Schladen / Harz
    Posts
    4205
    Downloads
    0
    Uploads
    0

    Default

    Hello,
    If you mean the circular interpolation then there is no difference!
    Give us a bit more information so we can help you.

    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />


  3. #3
    nbh's Avatar
    Join Date
    Jul 2003
    Location
    Bad Mergentheim
    Posts
    256
    Downloads
    0
    Uploads
    0

    Default

    Hello,
    Well I believe its works: switch spindle to axle operation and go ….

    With the 840 D the turn is an easy thing, on the C it’s a lot more effort to program it.
    It’s best to program it over a repetition loop, then you can change settings easier.

    Unfortunately we don’t have a 840 C anymore, otherwise I could have helped you.
    Greetings Werner



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

interpolation turn on a 840C

interpolation turn on a 840C