Siemens sinumerik 810m ga2 DNC

Results 1 to 3 of 3

Thread: Siemens sinumerik 810m ga2 DNC

  1. #1
    Member
    Join Date
    May 2015
    Location
    Bulgaria
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Siemens sinumerik 810m ga2 DNC

    Good day!
    Is DNC mode possible with 810M GA2?
    Thank you!

    Similar Threads:


  2. #2
    Member philscara's Avatar
    Join Date
    Jan 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Siemens sinumerik 810m ga2 DNC

    Yes go into Data In/Out and select data in and data out from there. You will need to set your communications in the 5000 setting parameters



  3. #3
    Member
    Join Date
    May 2015
    Location
    Bulgaria
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Siemens sinumerik 810m ga2 DNC

    I only have an input and output option. I don't have a BTR(GA3) start option



  4. #4
    SovietTwins's Avatar
    Join Date
    Aug 2021
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: Siemens sinumerik 810m ga2 DNC

    Hello. See my post.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Siemens sinumerik 810m ga2 DNC

Siemens sinumerik 810m ga2 DNC