My German isn't too hot, but I bet it's a driver issue related to slightly different hardware between the two machines.
Greetings,
Long story short. We are trying to recover from a HDD crash and so far we have managed to load a Norton Ghost image we had saved. The replacement HDD has 10GB size. while the original HDD was only 170MB.
Here are the symptoms.
Booting up process goes all the way to showing a partial HMI display, and at some point starts showing "ERROR!! DEVICE UNAVAILABLE" while in the background there are several apps trying to start i.e: machine/parameters/programs/dienste/diagnostics/inbetrieb nahme/CHIRON all of the mentioned try to start and everyone show error respectively after a few minutes.
Any idea what could be happening?
Important note: The Ghost image we are using is not the original from the HDD that crashed but instead is one we made from a very similar MMC102. different version.
Please help!
Similar Threads:
- Someone Please check my pcu 50.3 hard disk ghost image
- Problem- Ghost image
- Build Thread- Ghost Image explorer
- M500 Redsail Ghost Image
- Need Help!- Dual Image (ghost) on final product
My German isn't too hot, but I bet it's a driver issue related to slightly different hardware between the two machines.