Feed power

Results 1 to 2 of 2

Thread: Feed power

  1. #1
    Registered enzo33's Avatar
    Join Date
    Jan 2014
    Location
    tawastia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Feed power

    Hello

    Milling Siemens 840D
    What was the command to limit feed power
    example:

    S444 M3
    G01 X777. F1234
    ???=80 ; max power 80% (normal 100%)


    the feed/power will lower automatically now



  2. #2
    NITRO3966's Avatar
    Join Date
    Jan 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Feed power

    G96 S... LIMS=... F... ;Constant cutting speed ON
    G97 ;Constant cutting speed OFF

    S ;Cutting rate, m/min
    LIMS= ;Upper limit speed of the spindle with G96, G97 effective
    F ;Feedrate in mm/rev(G95); in/rev (G94)



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Feed power

Feed power