- FTP needed for 840 D SL series
-
Member
FTP needed for 840 D SL series
Hi all,
I am Deepak.
One of my customers, wish to install FTP Server on a remote PC & Connect 840-D Sl to it.
Has anybody done this before ?
Similar Threads:
-
-
Member
Re: FTP needed for 840 D SL series
I can probably help.
Please provide details - what does the customer want to achieve exactly ?
Swapping files ?
Does the siemens controller have a browser for internet or a file-service browser similar to windows explorer ?
Are the machines remote, firewalls, details are all important.
-
Member
-
Member
Re: FTP needed for 840 D SL series
Hi Mecanix,
Today I checked it again at my customer's place.
I am able to go to Setup>HMI>FTP
I then set the login (as Admin) & Password (1234)
But when I start the CIMCO FTP server on my laptop & try to access my C:\MASTER folder
I get the FTP page on the CNC screen. But Password option is not shown on CNC.
Also, it shows error could not connect to the FTP server. The exact error text message, I do not remember.
But I am not able to connect using the FTP option.
However, the share folder is working fine. I am able to see all the files of my laptop
on the CNC screen.
The customer wants FTP solution only.
The reason is they want to restrict some folders to some machines.
They have 3 such machines.
- Deepak
-
Member
Re: FTP needed for 840 D SL series
Dear Hanermo,
The customer wants the FTP option only.
The share folder option is working right now.
- Deepak
- FTP needed for 840 D SL series
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules