synchronisation

Results 1 to 2 of 2

Thread: synchronisation

  1. #1
    Registered astra330's Avatar
    Join Date
    Nov 2009
    Location
    khedfef
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default

    Morning

    We have a CTX machine with Siemens 840D controller (controller Shopturn) and powered tools.
    We want to mill a square in the program, but the programs only gives out the reverse rotation.

    Does anybody know how to switch it to synchronisation??

    Many thanks in advance



  2. #2
    Flexy's Avatar
    Join Date
    Jul 2010
    Location
    Friedland
    Posts
    246
    Downloads
    0
    Uploads
    0

    Default

    There are 2 possibilities depending on how you mill the square.

    If you mill e.g. over the “Tenoners milling cycle” simply set the “processing direction” to synchronisation in the program head.

    Or you have programmed a contour and used the “path milling cycle” the you have to change the path correction in the cycle and possibly set the processing direction to “backwards”

    Kind regards



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

synchronisation

synchronisation