- Siemens ShopTurn 810
-
Registered
Hello
I have a Saeilo TSL 500 with Shopturn 810 controller.
How can I increase the Tool memory?
I have around 70 tool spaces available at the moment.
Many thanks in advance
Regards
Dirk
-
-
70 spaces are not enough for you?
OK! Then you should contact your machine manufacturer.
A change of tool spaces would cause a memory formatting. I would not recommend to change the machine parameters yourself if you are not unsure about how to do it.
It would probably result in a complete data loss.
So get your hands off!! Contact your manufacturer and get an quote.
Then you can make the decision if 70 spaces is not enough!
- Siemens ShopTurn 810
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules