Hello
There’re several possibilities. The first one is usage of cut-in cycles. But id doesn’t make sense.
Things like that are made with prick turning above the contour.
Regards, InTex
Hello
Is there a possibility to program this cut-in (see attachment) with help of “cut-in cycles” in Shop Turn? Side faces are either “straight” or they continue in a certain angle up to the cut-in depth. How can it be combined?
Thanks a lot
Regards, vitra26
Hello
There’re several possibilities. The first one is usage of cut-in cycles. But id doesn’t make sense.
Things like that are made with prick turning above the contour.
Regards, InTex
Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
Hello InTex
Thanks a lot for your help. I’ll try that out.
Regards, vitra26