Zero point of the opposed spindle CTX 410

Results 1 to 2 of 2

Thread: Zero point of the opposed spindle CTX 410

  1. #1
    Registered holly620's Avatar
    Join Date
    Feb 2005
    Location
    Elbtal
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Hello
    The zero point of my opposed spindle is displaced. For example, I’d like to grip by 30mm but the opposed spindle grips by 28mm. How could I move the zero point at 2mm?
    Thanks
    Controller Shop Turn Powerline with Y-axis



  2. #2
    Registered heisflo's Avatar
    Join Date
    Oct 2009
    Location
    Roitham
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Didn’t you change the jaw length under >Offset>arrow rightwards>spindle?

    Regards, Heisflo



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Zero point of the opposed spindle CTX 410

Zero point of the opposed spindle CTX 410

Zero point of the opposed spindle CTX 410