Line-by-line milling of radius

Results 1 to 2 of 2

Thread: Line-by-line milling of radius

  1. #1
    Registered DGFräsen's Avatar
    Join Date
    Dec 2007
    Location
    Obbach
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hello
    Who could help me?
    I have to mill a radius of 46.3mm in a unit with measurements w=25mm/h=5mm/l=100mm (looks like a cup / radius in y/z levels)
    I know it’s possible to program this form with line/circle, but I didn’t manage to do it.
    I hope you can help. Thanks



  2. #2
    LesPaul666's Avatar
    Join Date
    Sep 2009
    Location
    Weilen
    Posts
    61
    Downloads
    0
    Uploads
    0

    Default

    Hello

    I’ve had this problem once, too.
    I chose a tool axis in X and programmed a circuit pocket. It worked very well then.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Line-by-line milling of radius

Line-by-line milling of radius