Parameter editing

Results 1 to 2 of 2

Thread: Parameter editing

  1. #1
    Registered TobiasCNC's Avatar
    Join Date
    Aug 2009
    Location
    Sülzdorf
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Is it possible to use shopmill parameters in the user interface (parameters can be changed and written in the user interface, too)?
    For example, for a conical pocket or for a bevel in a pocket. If it’s possible, then how exactly?

    Thanks in advance



  2. #2
    Boern's Avatar
    Join Date
    Nov 2004
    Location
    im Raum Metzingen
    Posts
    2484
    Downloads
    0
    Uploads
    0

    Default

    Sure, it’s possible:

    ;----------------------
    R30=45 ; X-axis
    R31=45 ; Y-axis
    R32=-5 ; Z-axis
    ;----------------------

    N20 G54 ; zero point
    N30 G0 X-65 Y65 ; starting position
    N40 G0 Z0 ; starting position
    N50 G0 Z=-R32 ; 1st parameter

    N60 START_RE: ; label end
    N70 G1 G41 Y=R31 F100
    N80 G1 X=-R30
    N90 G1 Y=-R31
    N100 G1 X=R30
    N110 G1 Y=R31
    N120 G1 G40 X-65 Y65
    N130 R30=R30-1
    N140 R31=R31-1
    N150 R32=R32+1
    N160 END_RE: ; label end

    N170 REPEAT START_RE END_RE P4
    ; Label 4x repeat (Z=0)
    N180 G0 Z100

    Make it with DIN/ISO!

    <b><br />Das dringendste Problem der Technologie von heute ist nicht mehr die Befriedigung von Grundbedürfnissen und uralten Wünschen der Menschen, sondern die Beseitigung von Übeln und Schäden, welche uns die Technologie von gestern hinterlassen hat.</b><br /><br />Dennis Gabor (1900-79), ungar.-brit. Physiker, Entwickler der Holographie, 1971 Nobelpr.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Parameter editing

Parameter editing