Siemens 810D tool offset

Results 1 to 7 of 7

Thread: Siemens 810D tool offset

  1. #1
    Member
    Join Date
    Apr 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Siemens 810D tool offset

    Hi,
    Can anyone help out, the tool offset datum every now and then will change datum from Z to Y which causes problems setting tool offsets and the only way i know of getting it back to z datum is to power down the machine and traverse datums.
    See attached JPEG.

    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Siemens 810D tool offset-20200114_084729-jpg  


  2. #2
    Member sabregr's Avatar
    Join Date
    Dec 2013
    Location
    Neapoli
    Posts
    10
    Downloads
    3
    Uploads
    0

    Default Re: Siemens 810D tool offset

    Is that a horizontal milling machine?



  3. #3
    Member
    Join Date
    Apr 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by sabregr View Post
    Is that a horizontal milling machine?
    Hi,it is a Vertical milling machine.
    Are you able to give a solution?
    Thank you.



  4. #4
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    331
    Downloads
    0
    Uploads
    0

    Default Re: Siemens 810D tool offset

    what G code do you have active G17..G18...or G19 ?



  5. #5
    Member
    Join Date
    Apr 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Siemens 810D tool offset

    Quote Originally Posted by machinehop5 View Post
    what G code do you have active G17..G18...or G19 ?
    Hi machinehop5,

    I have attached a jpeg of machine OFFSETT this has never altered by myself so has always stayed at what ever offsett is showing.

    Attached Thumbnails Attached Thumbnails Siemens 810D tool offset-offsett-jpg  


  6. #6
    Member
    Join Date
    Apr 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Siemens 810D tool offset

    Quote Originally Posted by machinehop5 View Post
    what G code do you have active G17..G18...or G19 ?

    Hi again machinehop5,

    I have also attached a jpeg of active G code when running machine.

    Thank you.

    Attached Thumbnails Attached Thumbnails Siemens 810D tool offset-g-codes-jpg  


  7. #7
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    331
    Downloads
    0
    Uploads
    0

    Default Re: Siemens 810D tool offset

    Quote Originally Posted by johnyj View Post
    Hi,
    Can anyone help out, the tool offset datum every now and then will change datum from Z to Y
    Odd behavior...I wonder if, you have a sticky button or Keyboard problem going on.



  8. #8
    CNCFr's Avatar
    Join Date
    Sep 2002
    Location
    Timbuktu
    Posts
    1391
    Downloads
    0
    Uploads
    0

    Default

    The tool offsets depends on the type of tool (milling or turning tool) and on the active plane selected by the G-Code G17 / 18 / 19.
    For a milling tool the tool length is defined in Z with G17. That's the default case.
    If you observe that the tool length sometimes is effective in Y instead of Z I would expect that you changed your active plane from G17 to G18.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Siemens 810D tool offset

Siemens 810D tool offset

Siemens 810D tool offset