Sinumerik 3N

Results 1 to 2 of 2

Thread: Sinumerik 3N

  1. #1
    Registered
    Join Date
    Jan 2016
    Location
    United States
    Posts
    2
    Downloads
    1
    Uploads
    0

    Default Sinumerik 3N

    Hi to All!
    I recently purchased a CNC Turret press Finn Power TP300 IF with sinumerik 3N. Had a problem with the monitor, which we replaced. It turns out that the batteries were dead and so it lost all of the parameters. I have the parameter files now, but i dont know how to load them up. Is anyone here familiar with parameter loading for sinumerik 3N ? and if yes can some one help and give the steps please??
    Thanks!!
    Victor

    Similar Threads:


  2. #2
    Member maltese's Avatar
    Join Date
    Feb 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Sinumerik 3N

    Hello,

    do you have those parameters still. I have the same problem now.

    thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sinumerik 3N

Sinumerik 3N