L184 Help

[KKmonK]

Hello first of all

I am working on a G200 with Siemens controller. I have the problem that the machine stops at L184 with the message “waiting for tool change recipe”. I am turning the B axis onto the rear milling head and after the (complete) positioning the machine simply stops. There is no alarm only the named above message.

In the L184-user cycle it stops at this position:
...
IF $A_DBB[976] <>1 <------ here it stops
T5=$A_DBB[978]
...
T501 is the milling head here (rear side)
Kind regards

[INDEX-Service]

Hello KKmonK

I have passed your problem on to our customer training department. As soon as we have a solution I will inform you about it.

Kind regards