- L184 Help
-
Registered
Hello first of all
I am working on a G200 with Siemens controller. I have the problem that the machine stops at L184 with the message “waiting for tool change recipe”. I am turning the B axis onto the rear milling head and after the (complete) positioning the machine simply stops. There is no alarm only the named above message.
In the L184-user cycle it stops at this position:
...
IF $A_DBB[976] <>1 <------ here it stops
T5=$A_DBB[978]
...
T501 is the milling head here (rear side)
Kind regards
-
-
Registered
Hello KKmonK
I have passed your problem on to our customer training department. As soon as we have a solution I will inform you about it.
Kind regards
- L184 Help
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules