- Work offsets shift on sinumerik 828D
-
Member
Work offsets shift on sinumerik 828D
Hi. I'm trying to shift the work offset in a program. I have tried using g10 g50 g52 g92 but none of them are supported by the controller. What else can I try? I guess I could change the machine variables directly, but this seems risky. Or I can add an x, y and z variable to all the coordinates in the program, but that is very tedious and I rather not. Any ideas? Thanks.
Similar Threads:
-
-
Member
Re: Work offsets shift on sinumerik 828D
Coordinate transformations (frames)
From Siemens manual......
Settable frames are the configurable zero offsets which can be called from within any NC
program with the G54 to G57 and G505 to G599 commands. The offset values are predefined by
the user and stored in the zero offset memory on the controller . They are used to define the
settable zero system (SZS).
See:
? Settable zero system (SZS) (Page 30)
? Settable zero offset (G54 to G57, G505 to G599, G53, G500, SUPA, G153) (Page 149)
https://www.google.com/url?sa=t&rct=...o2JeKLLX1qoPxw
-
Member
Re: Work offsets shift on sinumerik 828D
That's it. Thanks a lot. Simply trans z-18 does it.
- Work offsets shift on sinumerik 828D
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules