- TRAORI - parameter and axis direction
-
Registered
Hello,
We using TRAORI function for swivel head. TRAORI type is 24.
now when our A axis is rotating after TRAORI active z axis is moving on positive direction(according to machine Z axis should move to negative direction). we tried by changing Z axis to opposite direction but that time X and Y axis movement is not perfect. please check below information and parameter(attached). and give us some solution.
1. Axis origins
X0 = front of table
Y0 = right side of table (seen from front of table)
Z0 = machine table surface
A0 = spindle pointing downwards (6 o’clock position)
C0 = spindle nameplate pointing towards front of machine (A axis gearbox pointing to back of machine)
2. Axis directions
X = positive is towards back of table
Y = positive is towards left
Z = positive is upwards
A = clockwise (view from front of the machine backwards)
C = counterclockwise (view from top of machine downwards)
please help us..
-
- TRAORI - parameter and axis direction
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules