- Sinumerik 810M MD364* MD368* problem!
-
Registered
Trying to do a retrofit with Sinumerik 810M (3GE 570.805.9101.04) but I have a problem.
My encoder has 1000 imp / rev and the pitch of ball screw is 8mm.
The display shows the path taken 2 mm for full circle.
>>MD 364 * and 368 * have no effect on measured size.<<
Please help.
-
- Sinumerik 810M MD364* MD368* problem!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules