Solid Steel Rod.

[audball22386]

I am looking for a supplier to order 1/8" and smaller solid steel rod from. A few people I have talked to suggested looking for steel wire distributors, but this has not turned up and useful leads, and any search online with wire in it, takes me to sites selling actually wire.

I'm in need of this to retrofit, some old 1/8" wire racks. so I know this stuff has to exist.

Any Suggestions?

TIA,
mike

Similar Threads:

• News 2014 NASCC : The Steel Conference & World Steel Bridge Symposium
• Need Help!- Problem Subtracting Solid from solid Ver25
• RFQ - laser cut 16ga steel pieces, and 2 1/8" steel pieces, have CAD
• Laser engraving of steel and solid carbide
• Which came first, Solid Edge or Solid Works?

[lerman]

I am looking for a supplier to order 1/8" and smaller solid steel rod from. A few people I have talked to suggested looking for steel wire distributors, but this has not turned up and useful leads, and any search online with wire in it, takes me to sites selling actually wire.

I'm in need of this to retrofit, some old 1/8" wire racks. so I know this stuff has to exist.

Any Suggestions?

TIA,
mike

http://www.mcmaster.com

Search for steel rod.

Ken

[Ken_Shea]

Any welding shop should have 1/8" steel gas welding rod in copper coated or uncoated, the length is usually 36" if that is not a problem.

[DAB_Design]

http://www.smallparts.com/materials/

Or direct link to 303 stainless rod (down to 1/16")
http://www.smallparts.com/products/descriptions/zrx.cfm